CGXMY - G-N METAL ASSEMBLY PASTE
- MSDS: CGXMY
- Manufacturer: DOW CORNING CORP
- Product Name: G-N METAL ASSEMBLY PASTE
- National Stock Number: 8030-00-831-4171
Product Identification
Product ID:G-N METAL ASSEMBLY PASTE
MSDS Date:08/08/1995
FSC:8030
NIIN:00-831-4171
MSDS Number: CGXMY
Responsible Party
MIDLAND, MI 48686
US
Emergency Phone: 517-496-5900
Info Phone: 517-496-6000
Cage: 5D028
Contractor
Telephone: 517-496-6000/517-496-6315
Cage: 0HNT2
Ingredients
SOLVENT-REFINED LIGHT PARAFFINIC PETROLEUM DISTILLATE
CAS: 9010-79-1
Fraction By Weight: 48.0%
OSHA PEL 400 PPM
MOLYBDENUM DISULFIDE
CAS: 1317-33-5
RTECS: QA4697000
Fraction By Weight: 16.0%
OSHA PEL 10 MG/M3
ACGIH TLV: 10 MG/M3
ZINC PYROPHOSPHATE
CAS: 7446-26-6
Fraction By Weight: 13.0%
ETHYLENE DISTEARYLAMIDE
Fraction By Weight: 3.0%
SILICA, AMORPHOUS
Fraction By Weight: 2.0%
OSHA PEL 15 MG/M3
ACGIH TLV: 10 MG/M3
ALUMINUM PHOSPHATE
CAS: 7784-30-7
RTECS: TB6450000
Fraction By Weight: 2.0%
ACGIH TLV: 2 MG/M3
HYDROTREATED NEUTRAL OIL, C15-C30
CAS: 72623-83-7
Fraction By Weight: 2.0%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE: IRRIT, REDNESS, SWELLING. SKIN:
DEFATTING, DERMATITIS. INHAL: DROWSY, IRRIT TO NOSE/THROAT, NS
INJURY. INGEST: SLIGHT INJURY.
First Aid
First Aid:EYE: FLUSH W/WATER FOR 15 MINUTES. SKIN: REMOVE AND WASH
W/SOAP AND WATER OR WATERLESS CLEANSER. INHAL: REMOVE TO FRESH AIR.
INGEST: CALL DR. IN ALL CASES, GET IMMED MED AID.
Fire Fighting
Flash Point Method:CC
Flash Point:>212F,>100C
Extinguishing Media:WATER, WATER FOG OR SPRAY, CARBON DIOXIDE, DRY
CHEMICAL, FOAM.
Fire Fighting Procedures:USE SCBA AND PROTECTIVE CLOTHES.
Accidental Release
Spill Release Procedures:SCRAPE UP AND CONTAIN FOR SALAVAGE/DISPOSAL.
OBSERVE ALL PERSONAL PROTECTION EQUIPMENT RECOMMENDED.
Handling
Handling and Storage Precautions:USE REASONABLE CARE.
Other Precautions:THERMAL BREAKDOWN OF PRODUCT DURING FIRE/HIGH HEAT
MAY EVOLVE HAZARDOUS DECOMPOSITION PRODUCTS: CARBON OXIDES, TRACES
OF INCOMPLETELY BURNED CARBON COMPOUNDS, FORMALDEHYDE, METAL
OXIDES, SULFUR OXIDES , NITROGEN OXIDES, PHOSPHOROUS OXIDES.
Exposure Controls
Respiratory Protection:USE RESPIRATORY PROTECTION UNLESS ADEQUATE LOCAL
EXHAUST VENTILATION IS PROVIDED OR AIR SAMPLING DATA SHOWS
EXPOSURES ARE WITHIN RECOMMENDED GUIDELINES. USE
ORGANIC/VAPOR/DUST/MIST TYPE RESPIRATOR.
Ventilation:LOCAL EXHAUST OR GENERAL VENTILATION RECOMMENDED.
Protective Gloves:NEPRENE, NITRILE, POLYVINYL ALCOHOL
Eye Protection:SAFETY GLASSES
Work Hygienic Practices:WASH AT MEALTIME AND END OF SHIFT. CONTAM
CLOTHES/SHOES SHOULD BE REMOVED AS SOON AS PRACTICAL, WASH BEFORE
REUSE.
Supplemental Safety and Health
NK
Chemical Properties
HCC:V6
Boiling Pt:B.P. Text:NA
Melt/Freeze Pt:M.P/F.P Text:NA
Vapor Pres:NA
Vapor Density:NA
Spec Gravity:1.35 @ 25C
pH:NA
Viscosity:NA
Solubility in Water:NE
Appearance and Odor:CHARCOAL GRAY PASTE, SLIGHT ODOR.
Percent Volatiles by Volume:NA
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS CAN CAUSE A REACTION.
Hazardous Decomposition Products:NONE
Disposal
Waste Disposal Methods:IN ACCORDANCE W/FEDERAL, STATE AND LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.